Dion Lewis
Bicycles are one of the most effective and wholesome ways of commuting. Although; parking them can be quite a cumbersome task. So; if you hold your bike inside your garage or bike shed, with your bike pedals, frame, and handlebars, obstructing your path, chances are, you may trip over it and hurt yourself. This is when a ceiling bike racks come into play. We are going to help you find the best ceiling bike racks for your garage.
Deciding where to store your bike is the troublesome part of owning a bike. Particularly; if you live in a small condo or have a congested garage. But imagine, storing them, without making any forms of contact with your floor. Thus; this would undoubtedly help de-clutter your space.
➥Here, you’ll get to know for sure the ways of storing your bikes within the balcony of your apartment
Ceiling bike racks would help you save-up an ample amount of space, by storing your bike to the bike carrier attached to the ceiling. Above all; you are getting to properly utilize the unused ceiling space. In short; this is an economic and effective process of storing your bike, away from everyone else’s reach.
Ceiling mounted bike racks can be categorized into three types, these are listed below. Also; for each category, we have chosen a ceiling bike rack for you after having tested them out, firsthand.
- Pulley system for bike storage: Delta Cycle bike hoist
- Ceiling-mounted hooks for bikes: Saris Glide bike hoist
- Hydraulic ceiling-mounted bike-storage lift: Flat bike lift
Buying Guide for ceiling-mounted bike racks
Would it be preferable to store my bike indoors or outdoors?
Although; storing your bikes outside, may make the inside, less congested, but your bikes may be exposed to unnecessary external conditions. For example, rainwater, dust, dirt, and being susceptible to be stolen by thieves. Then again; if you have a ceiling-mounted bike rack and you are okay with your ceiling being occupied by your bikes. Then we’d advice, you store your bike indoors. Additionally; if you have multiple bikes, with each weighing around 50 lbs, then we’d recommend, you go for the Saris CycleGlide bike glider.
Otherwise; if you want to store a single bike, then you can choose between any of the bike racks mentioned below.
Is it okay if I put nails on my ceiling?
If you own the apartment/condo or the garage space, then drilling nails won’t be an issue. Otherwise; if you rent the place, then your landlord needs to be very understanding and considerate. Also; when it comes down to simple ceiling storage of your bike, you have a handful of options to choose from. You can either use hooks, to securely hold your bike in place, from the ceiling. For example; one option can be, Tekton 7644 bike hooks.
Moreover; if you prefer something like a bike hanger, designed like a claw, which would be hanging your bike vertically, from the ceiling. Then you may go for the Gladiator GarageWorks claw.
What should I be looking for, when buying a bike storage-rack?
You should note that ceiling-mounted bike racks, do not only vary in shapes and sizes; but, also the process through which they are mounted into your ceiling. Moreover; ceiling-mounted bike racks can be categorized into, at least 3 different types. These are:
1) Pulley system
2) Hook mechanism
3) Motorized ceiling-mount
Based on the bike rack’s design, bike holding capacity, bike holding position, construction, and mounting. The type of bike rack is determined. Therefore; to put into a nutshell, you should choose a ceiling bike rack, which would offer you secure storage. Also; at the same time give you easy access to your bikes. Last but not least; de-clutter your floor space.
What materials are these racks constructed from?
Ceiling racks do not just vary in shapes and sizes, but also; the process and material with which they are manufactured. Moreover; racks that have a galvanized frame would provide you good value if compared with other racks. So; these are dipped in heated zinc, which gives them a covering, making them sturdy and resistant to corrosion.
Whereas; there are bike racks, which have a layer of powder-coating, this dry powder-coating is usually applied, electrostatically. Thus; they are heated to be able to provide a durable and shielding outer layer. Therefore; these bike racks are both lustrous, resistant to corrosion, and long-lasting, all at the same time.
Racks constructed from stainless-steel is without a doubt the most long-lasting, out of all the other categories. Moreover; it would give you a definite anti-corrosion property, which racks made from other materials, do not offer. Additionally; in most cases, they are covered with either a plastic or thermoplastic material. Finally, but importantly; they are very resistant to atrocious weather conditions.
Therefore; we can say bike racks are generally manufactured using three different types of materials, these are:
- Zinc
- Powder-coating
- Stainless-steel
Our Top Pick(s)
We have prepared a comparison table, which would be giving you an insight into the features for the racks mentioned above.
We have shortlisted a total of 10 ceiling-mounted racks for accommodating your bikes, these are listed below:
| Ceiling Rack | Why we recommend this |
|---|---|
| Delta Cycle El Greco Bike Hoist | Versatile and auto-locking mechanism Editor’s Choice |
| Saris CycleGlide Bike Glider | Multiple bike storage & patented bike glider Our Premium Choice |
| Gladiator GarageWorks Claw | Push-lock mechanism & durable plastic construction Our Value Choice |
| Racor – PBH-1R Pulley Lift | Secured and easy-lifting pulley mechanism |
| Tekton 7644 Bike Hooks | Economic and heavy-duty |
| Cartman Bike Hoist | Secure-locking mechanism |
| RAD Sports Bicycle Hoist | Excellent locking-mechanism |
| Flat Bike Lift | Hydro-pneumatic lifting system and parallel to ceiling bike storage |
| Bike Lane Bicycle Storage Lift | Durable and Minimum tool installation |
| Floaterhoist BA1 Bike Hoist | For Recumbent bikes |
Out of the above-mentioned bike holders, we have, after having tested them out individually for you, chosen, Delta Cycle El Greco bike hoist as the overall editor’s choice. In short; We have tested this rack out, fitting it to our ceiling and it didn’t disappoint. Moreover; it can perfectly lift your bike, with ease towards your ceiling with very little effort. Also; it can be stored securely.
Our Editor’s Choice
(Versatile and auto-locking mechanism)
- Easy to install: Yes
- Bike Holding Capacity: 1
- Shipping Weight (lbs): 1.8
- Dimension(inch): 576 x 6 x 168
- Security: Auto-locking mechanism
- Weight Bearing Capacity(lbs): 50
- Loading and accessing bikes: Easy
- Type of Mounting: Ceiling-ascended hoist
- Bike holding position: Horizontally hoisted
- Additional feature: Auto-locking mechanism
The Delta Cycle El Greco bike hoisting tool would provide you with a solution to lift your bike, towards your ceiling. While; storing it away, safely for you. Thus; this whole process will free up a lot of room or garage space for you. Additionally; providing all your belongings additional room for storage, all the while, giving your bikes effortless ceiling access.
This cycling lifting system has been designed to lift your bikes towards the ceiling. Also, equipped with a sturdy pulley system and durable hooks. Thus; this would allow you to effortlessly hoist up objects, of the ground without even breaking a sweat. Moreover; the strong grip and the ample amount of tension means, your necessary items can also be lowered down with relative ease.
The most useful feature of this product is, it is not only meant for bicycles. In short; you can store heavy objects, such as:
- Canoes
- Kayaks
- Ladders
- Smaller cargo-boxes
- Cargo-racks
The installation process is also fairly easy. Certainly; this is a very user-friendly bike rack. Besides; for the installation process, all you need to have with you is the necessary tools, a ladder and have the correct measurements. That should be enough for you to install the rack within a very short space of time. You can either buy the rack, containing only a hoist or a hoist along with straps.
El Greco is a very economical bike rack. It can be easily installed to save up floor space.
Some of the advantages of Delta Cycle El Greco have been listed down. Which we shall be discussing in detail, later:
- Damage protection
- Prolonged durability of tires
- Makes easy access
- Simplicity
- Robustness
We have chosen, Saris bike CycleGlide bike glider as our Premium choice. So, this is a very intelligently designed bike glider to accommodate your bike, on your ceiling. Moreover; ceiling bike gliders like these free up much-required space in your garage. All the while, making your bike easily accessible. Besides; Saris CycleGlide comes with gliding arms to move your bikes easily and moveable wheel hooks are in place to fasten your bikes in place.
Our Premium Choice
(Multiple bike storage & patented bike glider)
- Security: N/A
- Easy to install: No
- Dimension(inch): 1 x 1 x 1
- Bike Holding Capacity: 4/6
- Shipping Weight (lbs): 13.8
- Type of Mounting: Ceiling mounted glider
- Loading and accessing bikes: Moderate
- Weight Bearing Capacity(lbs): 50 to 200
- Bike holding position: Horizontally upturned
- Additional feature: Large wheelbase, Ample bike holding capacity
Additionally; you can store kids and adult bikes with relative ease. Also; it would be comparatively easy for you to hoist them up and take them down from the ceiling. Thus; if you are in need to free up floor or wall space, then CycleGlide is an ideal bike glider for you. This rack has two ceiling tracks that are mounted to the ceiling beams. Moreover; this is the singular portion of the rack, which you cannot move.
Besides; there are four moving gliders, which have been attached to the tracks. Also; each glider can hold two-wheel hooks. Furthermore; this wheel-hooks can glide along, thus; they are capable of accommodating wheelbases of any lengths, starting from kids bikes to adults large-framed bikes. Moreover; the gliders are movable across the track. Therefore; whenever you need access to a single bike, all you need to do is to move the other one out of the way to have access to the one required. Additionally; one of the best features of ceiling rack, this also includes, CycleGlide, is, you can also get to park your vehicle underneath your hanging bikes. This, in turn, would allow you to fully optimize the garage space.
Also; each glider has a capability of carrying, a maximum bike load of 50 lbs. Added to that, your bike’s tires as wide as 2.5″ can be held by this rack. This glider can store a total of 4 of your bikes, at a time. Although; if you use an add-on, you hold as many as 6 bikes at a time to this glider. Moreover; this has a wheelbase of 56″, so it is capable of storing bikes of wide varieties.
However; a drawback of using ceiling storage is if you a bit on the smaller stature, then you’d be facing some difficulties in loading and accessing bikes on your ceiling. Also; it may take some time for you to install the rack on your ceiling. Even though; all necessary instruction is provided within the packaging.
Last but not least, Gladiator GarageWorks claw, is selected for the value choice award. This has been considered after testing it out, firsthand. Therefore; we are giving this the value choice award. After having considered other possibilities for you, we believe, this would offer you the best value for your buck. Also; we shall be discussing its features in detail, below.
Our Value Choice
(Push-lock mechanism & durable plastic construction)
- Easy to install: Yes
- Security: Push-lock
- Bike Holding Capacity: 1
- Shipping Weight (lbs): 1.35
- Dimension(inch): 13.8 x 7 x 4.5
- Loading and accessing bikes: Easy
- Weight Bearing Capacity(lbs): 50
- Type of Mounting: Ceiling-hoisted claw
- Bike holding position: Vertically attached
- Additional feature: Sturdy plastic construction, Push-Lock mechanism, Easy opening, and closing
Provided that you don’t own a fat tire, downhill mountain-bike, weighing more than 50 lbs. Then, using the GarageWorks ceiling-mounted rack would help you to efficiently, quickly and easily hang your bike, in a vertical position. Moreover; this rack has a push to open or close the unguis system. Therefore; this would either hold your bike’s front or rear wheel grabbing into it, securely. Also; this mechanism ensures, your bike’s wheel is grasped and let go of, steadily.
Thus; the Gladiator would give you an uncomplicated solution for storing your bikes. Additionally; it is capable of providing you with a secure storage solution for both children and adult bikes.
This product has a dimension of 13.8 x 7 x 4.5. Moreover; it is capable of holding your bike weighing as much as 50 lbs. Additionally, it can hold tires as wide as 2.4″. Just as importantly; Gladiator would be providing you with a lifetime warranty for this product.
10 best ceiling-mounted bicycle racks you can invest in today
A list of some ceiling-mounted racks, offering you a good value and desirable service, will be discussed, throughout this article. Below, we have prepared a table containing the necessary specifications, that would alleviate your task of selecting your desired bike rack.
| Ceiling-mounted rack | Preview | Shipping weight (lbs) | Bike Capacity | Rack style | Product dimension (inches) | Item Weight | Bike holding position |
|---|---|---|---|---|---|---|---|
| Delta Cycle El Greco bike hoist |  | 1.8 | 1 bike | Ceiling-ascended pulley | 576x6x168 | 1 lbs | Horizontally hoisted |
| Saris CycleGlide bike glider |  | 13.8 | 4/6 bikes | Ceiling-mounted glider | 1x1x1 | 2.2 lbs | Horizontally upturned |
| Gladiator GarageWorks claw |  | 1.35 | 1 bike | Ceiling-hoisted claw | 6×9.75×3.75 | 1.35 lbs | Vertically attached |
| Racor – PBH-1R pulley lift |  | 2.7 | 1 bike | Ceiling-hoisted pulley | 10.4×5.5×3.6 | 2.7 lbs | Horizontally hoisted |
| Tekton 7644 bike hooks |  | 1 | 1 bike | Ceiling-hook mount | 11.8×5.3×1 | 1 lbs | Vertically attached |
| Cartman bike hoist |  | 7.45 | 1 bike | Ceiling-ascended pulley | 10.4×10.3×4.6 | 7.45 lbs | Horizontally hoisted |
| RAD Sports bicycle hoist |  | 4.35 | 1 bike | Ceiling-mounted pulley | 12x6x9 | 4.35 lbs | Horizontally hoisted |
| Flat bike lift |  | 32.9 | 1 bike | Hydro-pneumatic lifting system | N/A | 32.6 lbs | Vertically hoisted |
| Bike Lane bicycle storage lift |  | 8 | 1 bike | Ceiling-ascended pulley | 6x12x12 | 8 lbs | Horizontally hoisted |
| Floaterhoist BA1 bike hoist |  | 11.2 | 1 bike | Ceiling-mounted pulley | 45x6x7 | 11.2 lbs | Vertically hoisted |
1. Delta Cycle El Greco rack
Versatile and auto-locking mechanism
- Easy to install: Yes
- Bike Holding Capacity: 1
- Shipping Weight (lbs): 1.8
- Dimension(inch): 576 x 6 x 168
- Security: Auto-locking mechanism
- Loading and accessing bikes: Easy
- Weight Bearing Capacity(lbs): 50
- Type of Mounting: Ceiling-ascended hoist
- Bike holding position: Horizontally hoisted
- Additional feature: Versatile, auto-locking mechanism, heavy-load bearer, lifetime warranty
Features & Considerations:
- Versatility: One of the features that stands out for this product is, not only can it be used to pick up and store your bikes. But; you can also hold heavy objects, such as smaller cargo boxes, racks for storage, canoes, kayaks, and ladders.
- Loading & Accessing bikes: It can lift your heavy objects, off the ground, without you having to apply any strength. Also; it is comparatively easy for it to lower heavy objects since the tension within the rope is abundant and the grip firm and easy. Therefore; it would be a straightforward process for you to mount and access your bikes from El Greco.
- Protection: Delta Cycle El Greco would hold your bikes safely along your ceiling. Thus; it would be less susceptible to be exposed to any forms of unwanted damage, such as bumps to its frame or damage to the paint job. Hence; storing your bike along with the ceiling would mean, it has a lesser chance of being exposed to the above-mentioned damage.
- Durability: This rack is very expertly designed, with quality engineering. Therefore; you can rest assured that it would be offering you a very satisfactory performance.
- Ease of access: Ceiling-mounted rack, especially the El Greco was designed for you, to de-clutter your floor space. Thus; you can use this bike rack in a very easy and uncomplicated fashion. Moreover; younger kids, as well as elderly people, can use this to fulfil their purpose, with relative ease. Additionally; the pulley mechanism would ensure that you do not require to use too much upper body strength. while pulling-up loads from the ground.
- Simplicity: It was designed with simplicity kept in mind. Since you and any other users would not be too keen to deal with devices that are too complicated or laborious to install. Also; it does not have a mechanism that might confuse you throughout its usage. Thus; Delta has designed this product to ensure, you can easily lift and lower down objects weighing as much as 50 lbs.
- Sturdiness: If you hoist up anything aerially, this might end up making you feel there’s not sufficient storage space available. Although; this isn’t the case for El Greco, it was designed, so that it would be robust enough to store objects, which are heavy enough. Thus; It would provide you a firm and secure storage facility.
- Installation: The El Greco is a comparatively uncomplicated ceiling-hoisting bike rack. Thus; if you possess the necessary, everyday tools, then if would a straightforward process for you to install this ceiling-rack. Moreover; you’ll be aided by the instruction manual, which comes along with the packaging. Additionally; you should choose a ceiling containing a stud, to install the rack. Also; here are some of the areas, on which you can easily install this bike rack. 1) Storage facilities 2) Bedrooms 3) Small apartments 4) Garage spaces
Some drawbacks:
- Nylon rope: The rope, being made from nylon means, it is a bit elastic. Also; you will find that it stretches a tad bit too much at times.
Delta Cycles have designed the El Greco, ceiling rack, to ensure a secure and straightforward storage solution for storing your bicycles. Also; to make sure to free up floor space. Additionally; this is a convenient process of accessing your bikes which minutes and requires you to put very little effort if you happen to ride every day.
Moreover; you can get to store other heavy objects as well, without having to go through too much hassle. Therefore; if you see any items lying around in your apartment or garage space, then using the El Greco, can be a very efficient way of hoisting it up and storing it for safekeeping.
Last but not least, this is a cost-efficient and safe way to store your everyday household items or belongings.
Also; some notable features that you should keep in mind are.
- Mounting hardware
- 48ft rope is included
- Limited lifetime warranty
- Maximum ceiling height of installation is 14 ft
- Packaging includes easily understandable installation instructions
Delta cycle
We would like to share an additional visual representation, below. So; we believe this in-depth idea about the Delta Cycle El Greco
2. Saris CycleGlide rack
Multiple bike storage & patented bike glider
- Security: N/A
- Easy to install: Yes
- Dimension(inch): 1 x 1 x 1
- Shipping Weight (lbs): 13.8
- Bike Holding Capacity: 4/6
- Type of Mounting: Ceiling mounted glider
- Loading and accessing bikes: Moderate
- Weight Bearing Capacity(lbs): 50 to 200
- Bike holding position: Horizontally upturned
- Additional feature: Large wheelbase, ample bike holding capacity, non-rusting, adjustable suspension hooks, patented glider-design
Features & Considerations:
- Capacity and Specs: Each glider of the CycleGlide can hold 50 lbs. Also; it can hold tires, as wide as 2.5″. Moreover; this rack is manufactured with 4 gliders to accommodate 4 bikes at a time. Although; you can purchase an add-on, to hold an additional 2 more bikes. CycleGlide has a maximum wheelbase of 56″. Therefore; you can get to store bikes having a wide range of sizes. The movable hook makes the whole process of storing your bike, super easy.
- Loading & Accessing bikes: If you’re a bit on the smaller stature, then it would be a bit challenging to store and access your bikes. Additionally; you would require quite a bit of upper body strength. However; if you want to free up floor space, then these are some of the challenges that you might want to overcome. So; let’s discuss some hacks that would hopefully make your life easier while using the Saris CycleGlide.
- Move all the other bikes out of your way and only make sure you’re keeping your eyes on the one you’re trying to access.
- When you’re mounting your bike, try hanging the rear wheel first. Thus; there will be a lesser possibility of you missing the hook that’d be holding your bike, as the bike would be less likely to be pivoting.
- Once you’re done with changing the rear wheel on a hook to one side, with your bike hanging in a vertical position. Similarly; push the other hook which would be accommodating your front wheel to the furthest end of the glider. Thus; judging by your wheelbase length, you an effortlessly, slide your front wheel on to the hook, you just pushed aside. Therefore; this is how you, attach your front wheel the hook, without having to carry and hold the bike’s weight for too long.
- Installation: Installing the CycleGlide to your ceiling, honestly, is not an easy task. Although; all the necessary instructions have been provided within the instruction manual. So; one thing you might have trouble finding is the ceiling joist or the studs. Also; it is highly recommended that you attach your rack into the joists, to make sure, the rack stays intact and in held tightly in position in a secure manner. Lastly; a lot depends on how your ceiling was constructed, depending upon that, you’d be required to take necessary actions.
- Patented-glider: The CycleGlide has patented gliders, which are attached to the tracks. Also; a pair of these gliders can hold one of your bikes. So; your bike’s wheel is hooked to these gliders. Thus; allowing you to accommodate bikes having a wide range of wheelbases starting from balance bikes to adult bike as well.
- Type of bikes: Saris have manufactured this rack to hold bike tires as wide as 2.5″. So; this includes; kids bikes, adult bikes as well as mountain bikes.
Some drawbacks:
- Fat-bikes: Mountain bikes or fat-tires bikes cannot be accommodated within the CycleGlide. As; might end up damaging the hook or put too much stress, Moreover; tire widths over 2.5″ cannot be accommodated.
Saris have manufactured a very admirably designed and top-quality ceiling-mounted bike rack. Using the CycleGlide means, you’d be able to de-clutter your floor space, at the same time ensuring your bike can be accessed, using a certain process. If you happen to have 4 to 6 people in your family, with everyone having bikes, then this would be the perfect bike rack for you. Also; this would be able to hold both your children’s and adult bikes at the same time. Lastly; if you have an ample amount of free ceiling space, this would be the perfect deal for you.
Saris CycleGlide
Shared with you, below, is a video. which would hopefully provide you with an insight for the Saris CycleGlide
3. Gladiator GarageWorks rack
Push-lock mechanism & durable plastic construction
- Security: Push-lock
- Easy to install: Yes
- Bike Holding Capacity: 1
- Shipping Weight (lbs): 1.35
- Dimension(inch): 13.8 x 7 x 4.5
- Weight Bearing Capacity(lbs): 50
- Loading and accessing bikes: Easy
- Type of Mounting: Ceiling-hoisted claw
- Bike holding position: Vertically attached
- Additional feature: Sturdy plastic construction, push-lock mechanism, easy opening, and closing
Features & Considerations:
- Versatility: It is capable of holding your bikes having tire widths of 2.4″. This includes kids bikes as well as bikes for adults. Although; you need to keep in mind that the weight your bike does not exceed 50 lbs.
- Durability: Gladiator constructed this rack using highly durable plastic. Thus; this means, you won’t have to worry about its robustness.
- Capacity: This rack can hold a solitary bike, weighing as much as 50 lbs.
- Security: The specially designed push-locking mechanism ensures, your bike is securely in place. So; with just a simple push, you can attach and unfasten your bike from the ceiling. Besides; the closed-loop design means, it will be providing you with enhanced security.
- Installation: The process of installing the rack into the ceiling is pretty straightforward. So; all you need to do is to install it to a stud within your roof, so that, it is held tightly. Moreover; you must make sure the rack is installed properly. Otherwise; it might lose grip and cause damage to your bike.
- Loading and accessing bikes: The push-lock mechanism ensures, you can load, store, remove and access your bike with relative ease. Thus; just by the unfastening the locking-system, to easily access your bike.
Some drawbacks:
- Fat-tire bikes: Not compatible, if you own a fat-tire bike. As the maximum width of your tire, it can accommodate is 2.5″. Thus a tire beyond that range, can not be accommodated.
Your bike storage solution will be made easy, all thanks to the Gladiator GarageWorks. So; storing your bike would be super easy with this ceiling-mounted rack. This would be offering you, a convenient, seamless and trouble-free storage for either your adult bikes or kid’s bike. Generally, a solitary bike weighing as much as 50 lbs can be held, vertically by the GarageWorks.
Additionally; the push-locking mechanism means, you’d be able to easily hang and store your bike securely. Also; freeing up your floor space in the process. Moreover; don’t be fooled by its plastic construction, even though, the rack is made from plastic yet, it is very sturdy and can hold and store your heavy mountain bikes as well.
Gladiator GarageWorks
We have chosen a visual demonstration, which would give you an idea of how the Gladiator GarageWorks functions.
4. Racor – PBH-1R rack
Secured and easy-lifting pulley mechanism
- Easy to install: Yes
- Bike Holding Capacity: 1
- Shipping Weight (lbs): 2.7
- Dimension(inch): 10.4 x 5.5 x 3.6
- Security: Pulley-locking mechanism
- Weight Bearing Capacity(lbs): 50
- Loading and accessing bikes: Easy
- Type of Mounting: Ceiling-hoisted pulley
- Bike holding position: Horizontally hoisted
- Additional feature: Easy-lifting, pulley locking mechanism, cord storage, adjustable
Features & Considerations:
- Design: PBH-1R has a glossy epoxy-coated texture. Thus; ensuring it provides durability while supporting your bike.
- Type of bikes: It can effortlessly hoist a solitary bike of yours, weighing a maximum of 50 lbs. Therefore; it can easily store one of your conventional adult bikes, kids bikes or mountain bikes
- Vacates floor space: The lifting pulley-mechanism aids you in freeing up a lot of floor space. Thus allowing you to make room for your other pieces of equipment. Additionally; this pulley-system would ensure that your bike is immune from day-to-day corrosion. Also; this would help keep your bike secure for longer periods.
- Easy-pulley system/ installation: You can easily install this pulley system. Also; the pulley-mechanism means, you’d be able to lift and lower down one of your bikes, weighing as much as 50 lbs.
- Durable construction: PBH-1R is constructed from very durable metal. Also; it is built to last a lifetime. Moreover; rust-resistant coating would ensure you more durability.
- Sturdy rope of pulley: The pulley’s rope is 48 feet long. So, this would assure your bike is not susceptible to any forms of damage. Moreover; the tough and longer length of the rope means, it can cover your ceilings as high as 14 feet.
- Safe locking mechanism: The locks within this rack is very secured. So, it will shelter your bike perfectly. Additionally; every time you remove or access your bike, it will safely hold your bike in position. Thus; ensuring there is no unwanted damage done to it by accidentally falling off. Lastly; this locking mechanism would work seamlessly for you and you can operate it without any difficulties.
- Loading and accessing bikes: The easy to use pulley-system means, you can easily load and remove your bikes. Therefore; you neither have to use too much upper body strength nor do you have to put in too much error during the process.
Some drawbacks:
- Ropes and screws: You should load bikes that are a bit on the lighter side since loading heavier bikes can cause too much stress on the ropes. Thus; it can end up being more susceptible to any forms of damage. Additionally; the screws that come along with the packaging can be replaced with more durable metallic screws.
The Racor PBH-1R would offer you an ideal way to hoist your bike overhead and also at the same time free up floor space. To clarify, you’d be getting yourself a bike lifting pulley-system which is mounted to the ceiling for holding your bike perpendicular to the ceiling. Moreover; you can effortlessly hoist up and lower down one of your bikes weighing as much as 50 lbs, with a ceiling-to-floor distance of 12 feet.
Additionally; you can lift and dismount your bikes simply by attaching the hook to the bike’s seat and handlebars while pulling the rope. Meanwhile; when you decide to go for a stroll, all you need to do is lower your bike and unfasten the rope, also, you don’t need any additional ladders to access it. According to a conducted survey, bikes happen to be one of the heaviest items for hoisting, but the PBH-1R performs this task very efficiently. Added to that, the secure locking mechanism holds the pulley’s road securely, making sure it doesn’t accidentally release your bike.
Racor – PBH-1R
Below, contains a video, which would give you an idea, of how the Racor -PBH-1R works. Thus; this would hopefully help to decide if you want to go for this bike rack.
5. Tekton 7644 rack
Economic and heavy-duty
- Security: N/A
- Easy to install: Yes
- Shipping Weight (lbs): 1
- Bike Holding Capacity: 1
- Dimension(inch): 11.8 x 5.3 x 1
- Loading and accessing bikes: Easy
- Weight Bearing Capacity(lbs): 100
- Type of Mounting: Ceiling-hook mount
- Bike holding position: Vertically attached
- Additional feature: Heavy-duty, non-deformable, non-slipping, easy installation
Features & Considerations:
- Heavy-duty construction: Tekton is built from durable, galvanized steel. It has a non-slipping, non-tarnishing coating over it. Thus; making sure your bike is securely in position.
- Easy installation: Installation of this hook is very straightforward. So; all you need to do is choose a wall stud to attach the hook into, this way, there won’t be any chances of the bike losing its grip.
- Versatile: You can use this hook can be used for various purposes, such as; for hanging lawn furniture, containing your garden hose and for holding your bikes.
- Heavyweight carrier: Tekton 7644 is capable of heavy usage. Thus; you can use it for storing your heavier fat-tire mountain bikes, weighing as much as 100 lbs.
- Loading and accessing bikes: Loading your bike is pretty straightforward, all you need to do is attach your bike’s front or rear wheel to the hook. Also; you do not have to put in too much effort while going through the whole process.
- Type of bikes: The Tekton 7644 is a good fit for your fat-tire mountain bikes, you shouldn’t hold bikes of smaller stature. For example, it would be better if you do not store kid’s bikes using this wall hook.
Some drawbacks:
- Usage of stud finder: While mounting the rack, on your wall, make sure to do it in a wall stud. That way, your bike hook would remain in a secure position. Also; it can easily be installed on the concrete or wooden surface.
- For smaller tires: For accommodating your kid’s bikes, with smaller tires, then this is not a bike holding hook that you should be looking at. Because; it was designed to hold bike tires as wide as 4.5″
Tekton has come up with a budget-friendly and heavy-load carrying option to hold one of your bikes into a durable hook mechanism. Thus; this bike storage solution can help you to de-clutter your apartment or garage space. Moreover; don’t be fooled by the appearance of the hook, as it is capable of holding one of your bikes weighing as much as 100 lbs.
Besides; the capability of being able to hold bikes weighing 100 lbs means, it can hold bikes of most categories. Provided that the wheel or tire size doesn’t exceed the hook’s width. Although; this hook has an impressive 4.8″ thick tire holding capacity, so, this can easily accommodate your fat-tire mountain bikes. Therefore; it may not be the most viable option if you want to hold bikes of smaller stature, such as kid’s bikes.
Moreover; this hook has a non-slipping, non-tarnishing layer on its surface. Meaning, you can easily secure your bikes, effortlessly. We advise you to use a wall stud while installing this bike hook. Also; this would work very well if you use a concrete or wooden roof surface.
Tekton 7644
The following video, below, demonstrates the process of installing the Tekton 7644 bike holding hooks on your ceiling. Therefore; we hope this will help you decide, whether, this is a product, that you would like to go for.
6. Cartman rack
Secure-locking mechanism
- Easy to install: Yes
- Shipping Weight (lbs): 1
- Bike Holding Capacity: 1
- Security: A locking mechanism
- Dimension(inch): 10.4 x 10.3 x 4.6
- Loading and accessing bikes: Easy
- Weight Bearing Capacity(lbs): 50
- Type of Mounting: Ceiling-ascended pulley
- Bike holding position: Horizontally hoisted
- Additional feature: Secure locking-mechanism, pre-assembled
Features & Considerations:
- Bike-lifting mechanism: The pulley-system enables easy lifting of your bike from the ground up to ceilings as high as 12 feet. Also; a 48 feet rope comes along with this pulley, ensuring easy lifting and removal of your bikes.
- Installation: You are advised to use a drywall surface for installing the rack, be it in your apartment or garage space. Moreover; you can use a 1 x 4 board to install the rack. Also; following the instruction given within the installation manual would help you in completing the task, easily.
- Construction: Cartman is constructed using a solid steel-material, this ensures, the rack is durable. Moreover; this facilitates holding your bike securely.
- Loading and accessing bikes: The pulley-mechanism efficiently lifts your bike to the ceiling and stores it safely, thanks to the 48 feet rope. Moreover; the well-designed pulley-system means, you also don’t have to put in too much effort while lowering your bike. So; to lift the bike, all you need to do is just attach the hook to the bike’s handlebars and seat and just pull the rope, which is used for lifting.
- Security: During the lifting process, as you are pulling the rope, each pull ensures, the locking mechanism, securely locks into place, timely. Thus; this helps in avoiding any accidental drop of your bike.
- Type of bikes: You can easily hoist a solitary conventional adult bike or mountain bike. Moreover; this rack can withstand one of your bike’s weight up to a maximum of 50 lbs.
Some drawbacks:
- Installation instruction manual: The installation instructions which come along with this rack might not be totally clear for you to understand properly while installing the rack.
Cartman ceiling-mounted bike lifter was designed for you using high-quality durable solid steel portions. Thus; it is capable of resisting years of heavy and daily usage. Moreover; you can make proper usage of your apartment or garage’s vacant ceiling space for installing this bike rack and store your bikes comfortably. Also; as for the installation process itself, it will take you only a few minutes, provided that you go through the instruction manual provided.
So; during the installation, process all you need is, preferably a 1 x 4 board, along with some additional screws. We’d advise you to use a drywall surface for installing the rack. Moreover; once you are through with the installation process, and mount your bike, make sure to lower the hooks to the height of the bike. Thus; this way the rope of the pulley would remain tight, also; it would be able to a fair share of the bike’s weight. Therefore; the process of attaching and lowering your bikes is very simple, due to the user-friendly design of the pulley-system. Last but not least, you’d be able to free up some much-required floor space of your condo or bike shed.
Cartman
7. RAD Sports rack
Excellent locking-mechanism
- Easy to install: Yes
- Security: Safety locks
- Bike Holding Capacity: 1
- Dimension(inch): 12 x 6 x 9
- Shipping Weight (lbs): 4.35
- Loading and accessing bikes: Easy
- Weight Bearing Capacity(lbs): 100
- Type of Mounting: Ceiling-mounted pulley
- Bike holding position: Horizontally hoisted
- Additional feature: Rubber-coated hooks, easy installation, sturdy, indoor usage, safety-locks
Features & Considerations:
- Sufficient spacing between floor and ceiling: The rack was specially designed from ceilings as high as 12 feet. However; as a 12 feet distance means most people can easily go through the process of hosting bikes with relative ease.
- Rubber wadded hooks: Hooks that are built to hold your bike by the handlebars and seat have a rubber coating over it. So, this ensures there isn’t any damage to either your bike’s seat or handlebars, in any way.
- Durable and thick ropes: Ropes that come along with this
- Uncomplicated grip: You don’t have to put in too much effort when hoisting your bike upwards or lowering your bike down. Since the pulley-mechanism is very smooth and well-designed. Additionally; people of all ages and genders can seamlessly lift and lower down the with comparative ease.
- Outstanding locking-mechanism: One of this rack’s supreme features is it’s very secure locking-mechanism. Also; these locks are designed to provide your bike optimal protection. Thus; it ensures your bike doesn’t have to go through any unwanted damage. So; the locking-system expertly secures the pulley rope, each time you hoist your bike upwards, towards your ceiling. Therefore; you don’t have to worry about anyone nearby being exposed to any forms of damage while you haul your bike.
- Lifting weight capability: This rack is compatible with bikes weighing as much as 100 lbs. Thus; you can easily store a bike such as your fat-tire mountain bike which would weigh a lot less than 100 lbs.
- Design: It has a very stylish and sleek design. Moreover; this rack’s features help in giving it the upper hand if compared to other pulley-mechanism racks. Additionally; the rail-like features were designed to give you the option of either storing your bike in a horizontal or vertical position, hoisted from the ceiling. Also; there is an ample amount of spacing between the two hooks that would be holding your bike’s handlebars and seats. Thus; these two hooks are capable of holding a wide range of bike sizes and different shapes of bikes as well.
- Loading and accessing bikes: The easy to use pulley-system makes loading and removing bikes quite easy. So, all you need to do is, attach your bike’s seat and handlebars to the hooks and proceed with pulling the rope, this would easily allow you to lift the bike. Moreover; as for the case of lowering down your bike, you need to steadily release the rope, until it safely landed down. You do not have to use too much upper body strength, as the pulley-system would aid you during the process.
- Types of bikes: RAD Sports has designed this bike rack, to withstand one bike weighing as much as 100 lbs. Therefore; it can easily hold bikes of heavier stature. For example; regular adult bikes as well as fat-tire mountain bikes. Additionally; you can also hoist other household items, such as your ladder to save up garage space.
- Ease of installation: During the installation process, we recommend that you mount the rack into a ceiling joist to ensure that the rack is positioned firmly with the ceiling. Moreover; if you happen to have only the necessary household everyday tool, then you would not having any issue for installing this ceiling-mounted rack, within a very short space of time.
Some drawbacks:
- Rubber hooks: You should make sure the rubber hooks attached to this rack has a firm and proper grip on the bike’s seat and handlebars. Thus; ensuring that there isn’t any higher chance of your stored pieces of equipment coming crashing down and hurting anyone, nearby.
RAD Sports offer you a pulley-system bike hoisting solution for a solitary bike or any other household equipment. However; keep in mind that the weight of this given item doesn’t exceed 100 lbs. Moreover; the smooth pulley and well-positioned hooks mean people of any age can easily haul heavy bikes of other household equipment.
Also; the secure pulley rope holding mechanism ensures, your bike doesn’t fall off, accidentally. Additionally; we’d suggest you use a 2 x4 before mounting it onto your ceiling for better results. Lastly; if you want to go for lifting heavy products, then the RAD Sports would be providing you with a very good solution.
RAD Sports
The video that follows, underneath, is a review of the product, RAD Sports bike hoist, moreover; this would give you a brief idea of how the product works.
8. Flat bike lift rack
Hydro-pneumatic lifting system and parallel to ceiling bike storage
- Easy to install: Yes
- Bike Holding Capacity: 1
- Shipping Weight (lbs): 32.6
- Security: Quick-locking mechanism
- Weight Bearing Capacity(lbs): 46
- Loading and accessing bikes: Easy
- Bike holding position: Vertically hoisted
- Type of Mounting: Hydro-pneumatic lifting system
- Additional feature: Quick-locking mechanism, hydro-pneumatic lifting
Features & Considerations:
- Fast locking-system: The rack has a quick locking mechanism that holds your bike by its saddle. So, you don’t have to worry about your bike moving out of position and falling over. Also; this locking mechanism is compatible with all various categories of bikes.
- Hydro-pneumatic lifting system: This rack makes use of a pneumatic system and hydraulic pistons to lift your bike, securely. Hence, you don’t have to manually hoist up your bike by using your upper body strength. Therefore; this saves you from the trouble of having to overwork yourself. The whole process of your bike being hoisted up is carried out, seamlessly.
- Construction: It is a beautifully designed, well-constructed, and properly functioning product. Designed, to minimize the amount of work you have to do while hauling your bike.
- Ease of installation: Installation process is pretty straightforward. Upon going through the installation manual can help you in setting up the bike rack, very easily. Also; you can operate this with ease as well.
- Type of bikes: Flat bike lift is capable of lifting a bike or other items, weighing as much as 46 lbs. Therefore; it is only compatible with a regular adult, kids, or women’s bike. Hence, if you’re planning on hauling your fat-tire mountain bikes, into this rack, then it would not be compatible.
- Loading and accessing bikes: The Hydro-pneumatic lifting system makes the process of hauling and removing your bikes very easy, compared to other brands of bike racks. Thus; this would make your life easier, by helping you to lift your bikes effortlessly.
Some drawbacks:
- Shipping: If you’re residing in North America, then you may be required to pay quite a lot of shipping charges. Since this product is manufactured in Italy, so this would require a lot of time and money to be shipped to your location.
This rack operates and holds your bike differently if compared with the racks reviewed so far, we’ll be discussing this. later. So, even if you happen to have a very spacious and secured garage or apartment space, it still might be the case that your bikes lying around might end obstruct your path. It is ideal for ceiling having heights of 8 to 8.5 feet, also; a minimum of 145 cm of clearance is required for raising your bike, towards the ceiling. Therefore; hoisting your bike up and storing them parallel to the ceiling would be a good solution.
Thus; this would be saving up your floor space as well as a lot of headspaces since your bike would be held in a position that is parallel to the ceiling. This bike rack uses pneumatic utilities and hydraulic pistons to lift your bikes automatically. So, you don’t have to go through the trouble of having to use your upper body strength to lift your bike.
Hence all you need to do is put up your bike on the device bt lifting it a few feet into the rack by pulling it down from the ceiling. Also; at the same time make sure that your bike’s saddle is attached to the hook that comes along with this rack. So, from there onwards the racks hydraulic piston and the pneumatic system takes over, adjusting the bikes frame in a position which is parallel to your ceiling. Lastly, for accessing your bike by taking it down, all you need to do is follow the reverse process. This is a hydraulic bike rack, made in Italy.
Flat bike lift
The following video would show you, how the Flat bike lift, claims to hoist your bike towards the ceiling effortlessly.
9. Bike Lane rack
Durable and Minimum tool installation
- Easy to install: Yes
- Security: Safety locks
- Shipping Weight (lbs): 8
- Bike Holding Capacity: 1
- Dimension(inch): 6 x 12 x 12
- Loading and accessing bikes: Easy
- Weight Bearing Capacity(lbs): 100
- Type of Mounting: Ceiling-ascended pulley
- Bike holding position: Horizontally hoisted
- Additional feature: Rubber-wadded hooks, easy installation, sturdy, usage indoors, safety locks
Features & Considerations:
- Durable: It’s durability means, this rack can lift weights to a maximum of 100 lbs. Also; this rack is very well designed so you don’t have to worry about your bike’s security.
- Secure-locking mechanism: This rack has very commendable safety locks. Hence, your bike would be prevented from any form of unwanted damage. So; the locking-system would ensure your bike is held tightly and securely.
- Easy installation: You are advised to mount this rack to the ceiling joint, for better result. Therefore; this would assure your rack is held firmly and securely to the ceiling.
- Rubber-wadded hooks: Hooks that hold on to your bike is wadded with a rubbery texture. Thus; it helps in preventing any sort of damage being done to either your bike’s saddle, handlebars, or paint job.
- Loading and accessing bikes: All you need to do is, to place your bike securely to the hooks while loading your bike. Additionally; the two hooks are evenly spaced, to ensure your bike’s saddle and handlebars are held securely. And as for removing your bikes, the pulley mechanism would help you to easily lift it downwards towards the ground.
- Type of bikes: Bike lane designed this rack to accommodate weights of up to 100 lbs. Thus; you can easily secure your conventional adult bikes and also mountain bikes.
Some drawbacks:
- Instruction manual: You won’t be getting any instruction manual with the product. Thus; you might be facing some difficulties while installing the product on your ceiling. But, in case of any difficulties, you can always consult someone from Bike Lane.
This rack was designed to be very robust. Also; this bike rack securely holds your bikes, of heavier stature with these bikes being able to weigh as much as 100 lbs. Moreover; it is equipped with a very admirable and strong locking mechanism. Therefore; you won’t have to worry about your bike wobbling or falling off the ceiling by any chance.
As for the installation process; you only need the basic everyday household tools to mount this rack into your ceiling. However; there’s no instruction manual along with this product. Thus; you will have to figure it by yourself on how to install the rack securely on your ceiling. The claws that would hold onto your bike, is rubber-coated, so it won’t cause any damage to your bike’s finishing.
Bike Lane
10. Floaterhoist BA1 rack
For Recumbent bikes
- Easy to install: Yes
- Bike Holding Capacity: 1
- Shipping Weight (lbs): 11.2
- Dimension(inch): 45 x 6 x 7
- Security: A locking mechanism
- Weight Bearing Capacity(lbs): 55
- Loading and accessing bikes: Easy
- Bike holding position: Vertically hoisted
- Type of Mounting: Ceiling-mounted pulley
- Additional feature: Easy-lifting, gentle support, installs on various surfaces, recumbent-bike compatible
Features & Considerations:
- Loading and accessing bikes: The three individual points of hooks connected securely to three points of your bike means, you can easily and efficiently store and hold your bike. Similarly; for the process of removing your bikes, you just have to follow the reverse process, and this is going to be a pretty straightforward process for you.
- Type of bikes: BA1 can hold your bikes weighing as much as 55 lbs. Therefore; you can easily hold one of your regular adult, child, or women’s bikes with relative ease. Although; bikes which are heavier in stature, for example; fat-tire mountain bikes cannot be accommodated.
- Ease of installation: For installing this rack, we’d advise you to use a solid wooden joist for mounting the rack. Thus; ensuring your bike rack is held securely. Also; you can choose a concrete ceiling a well, to install your bike rack.
- Slings for the bike: The slings which have hooks attached to three individual points, hold on to your bike’s frame, tightly. Therefore; you don’t have to worry too much about its security.
Some drawbacks:
- Weight of rack: This rack is a bit on the heavier side, so you might have to go through quite a tough time while installing the rack into your ceiling.
BA1 can hoist your bike in a position parallel and along with your apartment or garage’s ceiling for efficient storage. So, compared to other wall mounted bike racks, this rack functions a bit differently. Moreover; this rack has three individual and independently functioning ropes and pulley-system. Thus; this would be attached to three different portions of your bike.
The advantage of this bike rack is, you can easily get to place your bike very close to the ceiling’s surface, ensuring there is plenty of headspaces. Also; the portion of your bike which would be on the lowest point is the handlebars. Approximately, these would be 23″ from the surface of your ceiling. Additionally; this rack can hold one of your bikes, weighing a maximum of 55 lbs. To put it in a nutshell; Floaterhoist has gone for efficiency when they designed this bike rack. Therefore; you will be thoroughly satisfied, as to how this rack holds your bike.
Floaterhoist BA1
The video shared below, shows, how seamlessly, you’d be able to install and mount your bike into the Floaterhoist BA1 bike horizontal rack.
~FAQs~
Q1: Explain in brief, what exactly are ceiling bike racks?
Ans: One of the toughest things about having a bike is probably deciding where to store it. Additionally; if you live in a condo/apartment or garage space, which has limited space. So; now imagine being able to store your bikes even in such congested places. Thus; the whole point of a ceiling rack is storing your bikes to the ceiling of your desired space. Moreover; if you contain your bike on the ceiling space, it would also help you de-clutter the floor space.
That is to say; ceiling bike racks would save you a lot of much required, floor space. Besides; you can also get to properly utilize your unused ceiling space. Above all; these racks are very budget-friendly and comparatively easy to install as well. Also; you can make sure your bike is not obstructing anyone’s path, while they are moving around.
Q2: Why do you think, I should be getting myself a ceiling bike rack?
Ans: Although ceiling racks are not essential for you to own, even if you’re an avid bike enthusiast. But; then again a lot can depend on your floor space. However; you can also leave them outside of your house. But, that would mean, your bike would be more prone to be looted, if not stored securely. Moreover; chances are, the atrocious weather conditions might affect your bike’s overall texture.
Therefore; we advise if you want to store your bike, with freeing up floor space. Also; reducing your chances of tripping of getting hurt by your unsuspecting bike, loitering around in your condo or garage floor. So; there’s no better solution, other than purchasing a ceiling-mounted rack, that too at a reasonable price.
Q3: What options do I have in, to choose from when deciding to go for a ceiling-mounted bike rack?
Ans.: Ceiling-mounted racks can be categorized into at least 3 types, these are:
- Pulley system for bike storage:
- Ceiling-mounted hooks for bikes:
- Hydraulic ceiling-mounted bike-storage lift:
Thus; based on your preference, you can choose a bike rack from the categories mentioned above. Also; to facilitate this process; you can test them out by mounting your bike by visiting the vendor’s premises.
Q4: Which height of the ceiling would be suitable when choosing to mount the rack?
Ans: The whole point of installing a ceiling mount is how your ceiling has been designed. For instance; ceiling-mounted racks can be mounted on your ceiling, with your ceiling having a height between 8 feet to 22 feet. Provided that you have sufficient space underneath lower ceilings(8 feet). Whereas; for higher ceilings with 12 feet and above, mounting the rack, on the ceiling, and storing and accessing your bike would require you to use a step-ladder, even if you’re taller.
Besides; storing bikes on higher ceilings can be quite dangerous for you, without someone’s aid.
Q5: Is it possible for me to mount a ceiling-rack inside my condo, instead of a garage?
Ans.: Most ceiling bike racks are designed to be installed either in your apartment or garage space. Although; you need to make sure that all the necessary nuts and bolts are safely screwed into the joints or the ceiling studs. Thus; making sure, the racks are secured properly to the ceiling.
Also; you would find that most ceiling racks come along with the necessary hardware required for mounting it. Additionally; all necessary instructions would usually be provided for you, within the packaging.
Q6: Can I install the ceiling-mounted rack by myself, without the aid of anyone else?
Ans.: It is advised that you seek some expert’s help, for mounting the rack. Since; it requires you to go through several steps, such as setting up the ladder, to make sure, it is placed in the right height, close to your ceiling. However; if you want to set it up by yourself, we commend, you have someone beside you, who has moderate experience of setting up a bicycle rack or is familiar with bicycle accessories.
Therefore; you can follow either of the aforementioned steps to install the bike rack, to your ceiling. Additionally; we would advise you to be very vigilant at all times if you plan on installing the rack by yourself, to ensure, you do not end up injuring yourself, in any way.
Conclusion
Choosing the correct roof-mounted bike rack for your usage might be a bit confusing at times. Although; putting a significant about of time and research into it can result in finding yourself the ideal product to meet your needs.
Therefore; we have presented to you, throughout this article, detailed reviews of some of the most widely used and renowned ceiling-mounted bike racks. Hence; we believe, this would aid you to choose the bike rack, to store your bike safely. However; if you still have any doubts, you can always choose to consult with an expert, whose advice is surely doing to help make your decision.
